Page header image

Overview

Now, more than ever, it pays to "Seed Smart"
Electronic population rate control saves seed costs
    • Electronic population rate control

      Electronic population rate control

    With seed prices on the rise, producers want the ability to monitor and control seed populations on-the-go.

     

    The electronic population rate control (EPRC), in base equipment on the 1590 drill, allows producers to adjust the population rate right from the convenience of their tractor cab.

     

    The system:

    • Features an in-cab rocker switch to adjust the electric motor that controls the population rate 
    • Is manually adjusted-- the operator must hold down the adjustment switch until the desired rate is met
    • Can be overridden by pushing back on the motor to allow the producer to make a manual adjustment to the rate if needed

     

    NOTE: To give the producers the ability to monitor the population rate on the go, it is highly recommended they equip the unit with ComputerTrak™ or SeedStar™ population monitoring.

     

     

    NOTE: One system is used with 10-ft and 15-ft drills.  The 20-ft models require two systems.

1590 Seed/fertilizer delivery system
  • Seed tubeSeed tube

    A long, internally smooth seed tube with a molded elbow is supported at the seed tube support. From there, it is connected to a short convoluted seed tube, allowing product to flow smoothly to the openers and still flex.

     

    The tube flexes to avoid crimping for consistent seed flow. It is made of non-corrosive nylon material for long life. Long tubes are 21.8-in. and short tubes are 4.25-in.

     

    Elbow at meters to angle the seed tube directly to the openers.

     

    The smooth inside diameter provides smooth seed flow from the meters to the furrow openers.

  • Seed tube with Y-adapterSeed tube with Y-adapter

    The combination grain/fertilizer drill with 7.5-in. row spacing features a convoluted tube directing fertilizer from the discharge hole to the top of the steel seed tube at the seed boot. From there, a special Y-adapter lets seed and fertilizer mix before going into the furrow.

Productive seedbox capacities
    • Electronic population rate control

      Electronic population rate control

    With seed prices on the rise, producers want the ability to monitor and control seed populations on-the-go.

     

    The electronic population rate control (EPRC), in base equipment on the 1590 drill, allows producers to adjust the population rate right from the convenience of their tractor cab.

     

    The system:

    • Features an in-cab rocker switch to adjust the electric motor that controls the population rate 
    • Is manually adjusted-- the operator must hold down the adjustment switch until the desired rate is met
    • Can be overridden by pushing back on the motor to allow the producer to make a manual adjustment to the rate if needed

     

    NOTE: To give the producers the ability to monitor the population rate on the go, it is highly recommended they equip the unit with ComputerTrak™ or SeedStar™ population monitoring.

     

     

    NOTE: One system is used with 10-ft and 15-ft drills.  The 20-ft models require two systems.

Proven no-till openers provide excellent penetration with rugged durability
    • Seed placement with 90 Series Opener

      Seed placement with 90 Series Opener

    • 1590 series downpressure

      1590 series downpressure

    Single-disk no-till openers are included in base equipment. The single-disk openers are mounted on one rank on the 15-in. row spacing single rank units and on two ranks on the 7.5-in. and 10-in. row-spacing units. The single-disk openers provide consistent and accurate seed placement.

    The single-disk openers are gang mounted and are hydraulically raised and lowered. The hydraulics also work to provide a wide range of downforce settings for the openers.

     

  • The active hydraulics work in conjunction with the opener spring to provide an adjustable range of 165 lb to 400 lb of down pressure per opener to penetrate hard soils and heavy residue. 

    The down pressure is easily adjusted with the pressure valve located on the front of the mainframe, giving the operator the ability to quickly adjust, or dial in, the down pressure as operating conditions change.

    For additional ballast in hard-to-penetrate conditions, tractor suitcase weights may also be added to obtain maximum down pressure per opener. 

  • The no-till openers work not only in no-till conditions, but also in clean-till conditions. There are 2 in. of free travel in the opener before spring down pressure takes over, allowing the opener to move over individual rocks and minimizing the chance of the gauge wheels bulldozing soil in soft or mellow conditions.

    Secondly, the opener spring will then travel a maximum of 8 in. up or 6 in. down before the hydraulics react to uneven seedbeds.

    Lastly, the cylinders will allow the openers to travel up or down an additional 16 in. with active hydraulic down pressure to follow the ground.  The hydraulics will give the openers additional pressure when needed or allow the openers to go into relief if the pressure becomes too high. 

1590 10 ft
  • Dimensions
    • Working width
      • 1 10 ft
    • Transport width
      • 1 10, 3 ft, in.
    • Transport height
      • 1 6, 10 ft, in.
    • Overall length
      • 1 20 (with wheels) ft
    • Total weight empty
      • 1 6430 lb
    • Hitch weight empty
      • 1 2400 lb
    • Hitch weight full
      • 1 3300 lb
    • Clearance
      • 1 8 (road-opener) in.
  • Capacities
    • Plain grain
      • 1 35 bu
    • Grain/Fertilizer
      • 1 37.4 bu
  • Meters
    • Type
      • 1 Fluted-feed
  • Opener assembly
    • Number of openers
      • 1 16
    • Spacing
      • 1 7.5/15/20 in.
    • Down pressure
      • 1 Active hydraulic 165 - 450 lb
    • Disk
      • 1 18 in. @ 7 degree angle
    • Gauge wheels
      • 1 4.5 x 16 in.
    • Press wheels
      • 1 1 x 10 in.
    • Closing wheels
      • 1 1 x 12 in.
  • Monitor
    • Type
      • 1 SeedStar or ComputerTrak 250, 350, 450
  • Tractor requirements
    • Hydraulic requirements
      • 1 1 SCV
    • Electrical requirements
      • 1 7-pin
  • Additional information
    • Date collected
      • 1
1590 15 ft
  • Dimensions
    • Working width
      • 1 15 ft
    • Transport width
      • 1 15, 3 ft, in.
    • Transport height
      • 1 6, 10 ft, in.
    • Overall length
      • 1 20 (with wheels) ft
    • Total weight empty
      • 1 8460 lb
    • Hitch weight empty
      • 1 3100 lb
    • Hitch weight full
      • 1 4500 lb
    • Clearance
      • 1 8 (road-opener) in.
  • Capacities
    • Plain grain
      • 1 52.5 bu
    • Grain/Fertilizer
      • 1 57.5 bu
  • Meters
    • Type
      • 1 Fluted-feed
  • Opener assembly
    • Number of openers
      • 1 24, 18
    • Spacing
      • 1 7.5/15/20 in.
    • Down pressure
      • 1 Active hydraulic 165 - 450 lb
    • Disk
      • 1 18 in. @ 7 degree angle
    • Gauge wheels
      • 1 4.5 x 16 in.
    • Press wheels
      • 1 1 x 10 in.
    • Closing wheels
      • 1 1 x 12 in.
  • Monitor
    • Type
      • 1 SeedStar or ComputerTrak 250, 350, 450
  • Tractor requirements
    • Hydraulic requirements
      • 1 1 SCV
    • Electrical requirements
      • 1 7-pin
  • Additional information
    • Date collected
      • 1
1590 20 ft