Page header image
Simple float spring tension adjustment
    • DM50 Series float spring tension adjustment

      DM50 Series float spring tension adjustment

    Set the float spring to get maximum performance during operation. Adjust properly so the down pressure does not damage crop stubble as the skid shoes pass through the field.

Park stand and arm system
    • Park stand in park position

      Park stand in park position

    • Park stand in operating position

      Park stand in operating position

    The DM50 Series Disc Mower park stand and parking arm work together to transfer the mower’s weight to the cutterbar while in the parked position. This makes the attachment process easier, saving time and frustration.

    • Park arm in park position

      Park arm in park position

    • Park arm in operating position

      Park arm in operating position

Transport lock system
    • DM50 in transport position

      DM50 in transport position

    • DM50 in operating position

      DM50 in operating position

    The transport lock system is a simple mechanical system that saves time and ensures safety. Use the rope system to raise the transport lock, engage selective control valve (SCV) 1 to bring the cutterbar into the transport position, and release rope system to lock for transport.  

Shear hub assembly serviceability
    • Oval-shaped disc removed

      Oval-shaped disc removed

    Cutterbar serviceability is easier on the DM50 Series Disc Mowers. Remove the oval-shaped disc(s) with only four bolts per disc. The shear hub assembly can be serviced by removing the remaining four bolts. This will save time and oil replacement costs by not splitting the entire cutterbar to replace the sheared hubs as required in previous models. 

    • Shear hub assembly on DM50 Series

      Shear hub assembly on DM50 Series

    • Shear hub assembly on DM50 Series

      Shear hub assembly on DM50 Series

    Take the shear hub assembly off the cutterbar by removing only eight bolts.

Outer swath wheel
    • Oval-shaped disc removed

      Oval-shaped disc removed

    Cutterbar serviceability is easier on the DM50 Series Disc Mowers. Remove the oval-shaped disc(s) with only four bolts per disc. The shear hub assembly can be serviced by removing the remaining four bolts. This will save time and oil replacement costs by not splitting the entire cutterbar to replace the sheared hubs as required in previous models. 

    • Shear hub assembly on DM50 Series

      Shear hub assembly on DM50 Series

    • Shear hub assembly on DM50 Series

      Shear hub assembly on DM50 Series

    Take the shear hub assembly off the cutterbar by removing only eight bolts.

Category 1 and 2 Quik-Hitch compatible
    • DM5050 and DM5060 hitch

      DM5050 and DM5060 hitch

    • DM5070 hitch

      DM5070 hitch

    Models DM5050 and DM5060 are Category 1 and 2 Quik-Hitch compatible. Model DM5070 is Category 2 and Quik-Hitch compatible. This efficiency provides the operator greater productivity regardless of the model being used.

No data found