Page header image

Overview

You can judge a healthier bale by its cover
Guide rollers conversion kit for LW12 Series Bale Wrappers
  • This side-hill guide rollers conversion kit prevents bales from sliding off of the rollers when wrapping on hillsides.

Control box and levers are control center of machine
    • Multipurpose control center

      Multipurpose control center

    The control box and levers are the control center of the in-line bale wrappers. 

     

    A few of the uses are to turn the unit on and off, control the bale ramp, and bale push. 

Traction implement tires great on wet and uneven terrain
    • Assist in difficult field conditions

      Assist in difficult field conditions

    Traction implement tires make the in-line wrappers sure-footed on wet and uneven terrain to help get the machine where it needs to be for wrapping bales.


    The LW11 Series comes standard with the traction implement tires, and they are available on the LW12 Series only when ordered with single- or dual-power drive.

Adjustable tongue (hitch) folds out of way for easy repositioning of unit
    • Assist in difficult field conditions

      Assist in difficult field conditions

    Traction implement tires make the in-line wrappers sure-footed on wet and uneven terrain to help get the machine where it needs to be for wrapping bales.


    The LW11 Series comes standard with the traction implement tires, and they are available on the LW12 Series only when ordered with single- or dual-power drive.

Film wrap sensor shuts down wrapping cycle when out of film
    • Silver rod and limit switch comprise the sensor

      Silver rod and limit switch comprise the sensor

    The film wrap sensor automatically shuts down the wrapping cycle when the machine runs out of film or breaks.

Bale push is integrated into machine
    • Optional bale push off arm

      Optional bale push off arm

    • Operator needs to extend arm

      Operator needs to extend arm

    The bale push moves the bale to the back of the bale wrapper. From this point, the operator can utilize the optional bale push off arm to finish the process. The operator moves a lever to extend the arm, and the arm pushes the bale off onto the ground.

Quick-start power jack for LW1266 Bale Wrappers
  • These remote steering and shutdown conversion kits allows the operator to steer and start/stop the wrapper from the operator station of the tractor or skid steer loading the bales into the wrapper.

Remote steering and shutdown conversion kits for LW11 and LW12 Bale Wrappers
  • The quick-start power jack conversion kit lifts the bale wrapper to level the roller bed when starting a new bale line on the LW1266 In-Line Bale Wrappers.

Light kit for bale wrapper
  • A conversion kit provides night working lights on LW1166 and LW1266 In-Line Bale Wrappers.

Options available to increase productivity and uptime
  • A larger horsepower engine with a high-flow pump provides increased capacity to complete the job faster.

    NOTE: LW Series In-Line Baler Wrappers come standard with a 9.7-kW (13-hp) Honda engine.

    Honda is a registered trademark of Honda Motor Company.

  • Optional single-power driveOptional single-power drive

    Optional single- or dual-power drives allow the operator to maneuver the unit without attaching it to a tractor. The single-power drive has one rear tire, while the dual-power drive has two rear tires, to provide traction for the unit. These features are great for wet or uneven ground conditions where traction is limited.

  • Remotely stops and starts unitRemotely stops and starts unit

    This remote control allows the operator to steer, start, and the stop the machine without using the control panel on the machine.

  • Twin wrap kitTwin wrap kit

    This kit provides a double layer of wrap, increasing the amount of wrap applied to bales.

  • Lights allow operators to work longer hoursLights allow operators to work longer hours

    For early morning or late night work, choose between two optional work lights – light-emitting diode (LED) and halogen.

  • Optional guide rollersOptional guide rollers

    Optional guide rollers help keep the bales on the bale ramp in uneven terrain.

  • Power jackPower jack

    The optional power jack hydraulically raises the bale ramp to a level position to eliminate air pockets between bales when starting a row. The bale ramp is lowered after three bales have been wrapped.

  • Dimensions
    • Overall machine height
      • 1 2.7 m
      • 2 9 ft
    • Overall machine width
      • 1 2.7 m
      • 2 9 ft
    • Overall machine shipping length
      • 1 5 m
      • 2 16.4 ft
    • Overall machine length
      • 1 7.7 m
      • 2 25.4 ft
  • Weight
    • Weight
      • 1 2381.4 kg
      • 2 5250 lb
    • Towing unit minimum weight
      • 1 1587.6 kg
      • 2 3500 lb
  • Bale capacity
    • Round bale diameter
      • 1 1.7 m
      • 2 5.5 ft
    • Square bale size
      • 1 0.9x0.9x.1.7 m
      • 2 3x3x5.5 ft
  • Tires
    • Quantity
      • 1 Four (two front, two rear)
    • Size (front)
      • 1 11L-15 Implement
    • Size (rear)
      • 1 11L-15 Implement
  • Power
    • Engine type
      • 1 Honda
    • Engine size
      • 1 9.7 kW
      • 2 13 hp
    • Alternator size, amp
      • 1 18 amp
    • Start type
      • 1 Electric
  • Controls
    • Type
      • 1 Electric over hydraulic 12 V
    • Hydraulic system
      • 1 Self-contained
    • Steering
      • 1 Hydraulic with optional remote control
    • Power drive
      • 1 Optional, hydraulic single or dual wheel
    • Folding tail gate
      • 1 Hydraulic
    • Lift mechanism
      • 1 Optional hydraulic power jack
    • Compacting brakes
      • 1 Hydraulic adjustable pressure valve
  • Wrapping
    • Hoop speed
      • 1 Adjustable flow control valve
    • Cycle time
      • 1 Adjustable with limit switches
    • Wrapping capacity
      • 1 120 bales per hour
    • Film tensioners
      • 1 Two aluminum rollers: 76.2 cm
      • 2 30 in.
      • 3 with stretch: 55 percent
    • Bale alignment
      • 1 Adjustable bale guides
    • Bale guide rollers
      • 1 Optional
  • Final bale push off
    • Bale pusher
      • 1 Self-contained scissor linkage
    • Unloading
      • 1 Manual cross tube
  • Hitch
    • Type
      • 1 Folding
    • Length
      • 1 Adjustable
  • Lighting, marking and safety
    • Transport safety lights
      • 1 Standard
    • Markings
      • 1 SMV and reflectors
    • Safety tow chain
      • 1 Standard
    • Jack
      • 1 Standard
  • Set-up time
    • Labor hours
      • 1 1
  • Warranty
    • Machine
      • 1 1 year
  • Additional information
    • Date collected
      • 1