Page header image
3.7-m (12-ft) hydraulic unloading auger is standard equipment
    • Unloading auger extended

      Unloading auger extended

    • Adjustable slip clutch

      Adjustable slip clutch

  • Unloading auger shutoff doorUnloading auger shutoff door

    The 3.7-m (12-ft) hydraulically controlled unloading auger is standard equipment. It has a reach height of 19 ft at 53 degrees, can rotate 300 degrees, and is controlled from the tractor's operator station.

    An adjustable slip clutch for the unloading auger rotation provides protection against impact with a building or bin.

    A manually operated, slide-style door opens easily for unloading.

Hammer mill with four-way reversible steel-alloy hammers
    • Hammer mill with hammers shown

      Hammer mill with hammers shown

    • Hammer mill with door closed

      Hammer mill with door closed

    The 53-cm (21-in.) hammer mill has 66 thin, four-way reversible steel-alloy hammers that slice the material.

    As slicing occurs, a suction fan draws ground feed through the 600-cu in. screen area and allows a uniform mix. This mill and hammer design also reduces horsepower requirements.

Supplement hopper with sack cutter
    • Supplement hopper

      Supplement hopper

    • Ergo height for ease of loading

      Ergo height for ease of loading

    The supplement hopper is located on the left side of the grinder mixer. It is 58.4 cm wide and 45.7 cm long (23 in. wide and 18 in. long) and equipped with a sack cutter. The mouth opening is 88.9 cm (35 in.) above the ground. 

Large, 135-bu (170-cu ft) mixing chamber
    • 135-bu (170-cu ft) capacity

      135-bu (170-cu ft) capacity

    Big capacity means fewer loads to be ground, mixed, and delivered to feeders and bins.

Auger kits for GX1117 Grinder Mixer
  • Optional electronic scale shownOptional electronic scale shown

    Two Digi-Star® electronic scales are available for the GX1117 Series Grinder Mixer.

     

    The Digi-Star EZ2000 electronic scale measures the total weight of material in the mixing chamber.

     

    The Digi-Star EZ3200 electronic scale with an external horn measures the total weight plus the weight of each ingredient added to the mix.

     

    Digi-Star is a trademark of Digi-Star, LLC.

     

Electronic scales
    • 3-ft unloading auger extension

      3-ft unloading auger extension

    • Swinging intake auger in the operating position

      Swinging intake auger in the operating position

    The 0.91-m (3-ft) folding discharge auger extension kit consists of a (0.91-m) 3-ft length of auger, which is attached on a pivoting mounting bracket to the end of the 3.7-m (12-ft) unloading auger.

     

    The 1.8-m (6-ft) folding discharge auger extension kit consists of a 1.8-m (6-ft) length of auger, which is attached on a pivoting mounting bracket to the end of the 3.7-m (12-ft0 unloading auger.

     

    The discharge auger cradle extension kit holds the 0.91-m (3-ft) and 1.8-m (6-ft) auger extension in position for transportation.

     

    NOTE: The folding auger extensions must be folded back and locked in position for transport.

     

    The swinging intake auger has a diameter of 30.4-cm (12 in.) and a length of 2.1-m (7 ft.) In the operating position, the intake auger rests on the ground. The height from the ground to the top of the mouth intake flares is 50.8 cm (20 in.) The swinging intake auger is hydraulically driven with a variable-speed control and feeds a variety of grains into the hammer mill.

Hammer mill screens and screen storage
    • Twelve hammer mill screens available

      Twelve hammer mill screens available

    • Screen storage

      Screen storage

    Twelve hammer mill screens are available as attachments for the grinder mixer. Sizes range from 3.175 mm to 50.8 mm (0.125 in. to 2 in.).


    Screens are stored on the left side of the machine.

Auger extensions
    • The 0.9-m (3-ft) unloading auger extension

      The 0.9-m (3-ft) unloading auger extension

    • The 1.8-m (6-ft) unloading auger extension

      The 1.8-m (6-ft) unloading auger extension

    Unloading auger extensions are available in 0.9-m and 1.8-m (3-ft and 6-ft) lengths and are folded manually.

Mill screen field conversion kits for GX1117 Grinder Mixer
  • Mill screens field conversion kits are used for grinding a variety of sizes and types of grains and shelled and ear corn.

     

    All attachments, their respective sizes, and uses are listed below, and all are for use on the GX1117 Grinder Mixer.

Gravity feed hopper with magnets catches metal debris
    • Gravity feed hopper shown

      Gravity feed hopper shown

    • Two 102-mm x 457-mm (4-in. x 18-in.) magnets shown

      Two 102-mm x 457-mm (4-in. x 18-in.) magnets shown

    A gravity feed hopper with two heavy-duty 102-mm x 457-mm (4-in. x 18-in.) magnets catches metal debris.

35.6-cm (14-in.) vertical mixing auger with 76.2-cm (30-in.) base
    • PTO drive with banded V-belt

      PTO drive with banded V-belt

    • Quick-release pin to disengage mill

      Quick-release pin to disengage mill

    The GX1117 is available with a 540-rpm power take-off (PTO) or 1000-rpm PTO. The hammer mill is powered with an eight A-section-banded V-belt for a positive drive.


    The drive also features a quick-release pin to disengage the hammer mill.

Banded V-belt and mill disconnect
    • PTO drive with banded V-belt

      PTO drive with banded V-belt

    • Quick-release pin to disengage mill

      Quick-release pin to disengage mill

    The GX1117 is available with a 540-rpm power take-off (PTO) or 1000-rpm PTO. The hammer mill is powered with an eight A-section-banded V-belt for a positive drive.


    The drive also features a quick-release pin to disengage the hammer mill.

Self-contained hydraulic system
    • Hydraulic motor and reservoir

      Hydraulic motor and reservoir

    • Hydraulic hose holder

      Hydraulic hose holder

    The self-contained hydraulic system drives all of the feeding attachments and unloading mechanisms. The hydraulic system is supplied by a hydraulic motor with 39.75-L/min (10.5-gpm) flow. A cyclonic reservoir provides circulation to cool the hydraulic oil.

  • Dimensions
    • Overall machine height
      • 1 3.2 m
      • 2 10.6 ft
    • Overall machine width without intake auger
      • 1 2.4 m
      • 2 7.75 ft
    • Overall machine width with intake auger
      • 1 2.7 m
      • 2 8.7 ft
    • Overall machine length
      • 1 4.8 m
      • 2 15.7 ft
    • Ground clearance
      • 1 29.2 cm
      • 2 11.5 in.
  • Weight
    • Weight without intake auger
      • 1 145.1 kg
      • 2 3200 lb
    • Weight with intake auger
      • 1 1632.9 kg
      • 2 3600 lb
  • Tractor requirements
    • PTO hp 540 rpm PTO
      • 1 37.3-85.8 kW
      • 2 50-115 hp
    • PTO hp 1000 rpm PTO
      • 1 37.3-108.1 kW
      • 2 50-145 hp
    • PTO rpm
      • 1 540 or 1000 rpm
  • Hitch
    • Drawbar
      • 1 Category 1
  • Tires
    • Quantity
      • 1 Two
    • Size
      • 1 12.5L-15, 20 ply
  • Mixing chamber
    • Capacity
      • 1 4.8 m3
      • 2 135 bu
      • 3 170 cu ft
    • Diameter
      • 1 182.9 cm
      • 2 72 in.
  • Mixing auger
    • Diameter
      • 1 35.6 cm
      • 2 14 in.
    • Base diameter
      • 1 76.2 cm
      • 2 30 in.
  • Ladder
    • Style
      • 1 Standard, front mount over mill
  • Windows
    • Style
      • 1 Standard, 2-full length, 1-port hole
  • Hammer mill
    • Feed
      • 1 Gravity hopper or swinging intake auger
    • Width
      • 1 53.3 cm
      • 2 21 in.
    • Cylinder diameter
      • 1 50.8 cm
      • 2 20 in.
    • Hammer quantity
      • 1 66
    • Hammer type
      • 1 4-way reversible steel alloy
    • Screen area
      • 1 3871 cm2
      • 2 600 sq in.
    • Screen hole size
      • 1 0.3-5.1 cm
      • 2 0.125-2.0 in.
    • Rotational speed
      • 1 2700 rpm
    • Drive
      • 1 Eight A section banded v-belt
    • Magnet quantity
      • 1 Two
    • Magnet size
      • 1 10.2x45.7 cm
      • 2 4x18 in.
  • Unloading auger
    • Tube diameter
      • 1 20.3 cm
      • 2 8 in.
    • Length
      • 1 3.7 m
      • 2 12 ft
    • Standard reach height at 53 degrees
      • 1 5.8 m
      • 2 19 ft
    • 3-ft extension reach height at 53 degrees
      • 1 6.6 m
      • 2 21.5 ft
    • 6-ft extension reach height at 53 degrees
      • 1 7.3 m
      • 2 23.8 ft
    • Rotation degrees
      • 1 300 degree (angle)
  • Intake auger
    • Direct drive
      • 1 Independent hydraulic motor
    • Length
      • 1 213.4 cm
      • 2 84 in.
    • Diameter
      • 1 30.5 cm
      • 2 12 in.
    • Hopper size
      • 1 106.7 cm
      • 2 42 in.
    • Hopper minimum height
      • 1 50.8 cm
      • 2 20 in.
  • Hydraulic system
    • Type
      • 1 Self-contained, includes pulley driven pump, reservoir and pressure relief valve
    • Pump pressure
      • 1 22,063 kPa
      • 2 3200 psi
    • Oil flow
      • 1 39.7 L/min
      • 2 10.5 gpm
    • Hydraulic reservoir
      • 1 Cyclonic
    • Oil filter
      • 1 10 micrometer
      • 2 10 microns
  • Supplement hopper
    • Dimensions
      • 1 45.7x58.4 cm
      • 2 18x23 in.
    • Height
      • 1 88.9 cm
      • 2 35 in.
  • Lighting, marking and safety
    • Transport safety lights
      • 1 Standard
    • Markings
      • 1 SMV
    • Safety tow chain
      • 1 Standard
    • Jack
      • 1 Standard
  • Set-up time
    • Labor hours
      • 1 1
  • Warranty
    • Machine
      • 1 1 year
  • Additional information
    • Date collected
      • 1