Page header image
Lawn dethatching kit for SW21 Series Loader Mount Rotary Brooms

    Lawn dethatching kit for SW21 Series Loader Mount Rotary Brooms improves control of ground pressure when dethatching and general sweeping by moving the gauge wheels in front of and closer to the brush. The kit includes support components, hardware and installation instruction. Gauge wheel kit required and sold separately. Compatible with dust suppression kit. 

Wafer kit for SW21 Series Loader Mount Rotary Brooms
  • The 50/50 poly/steel wafer brush replacement kit for the SW2160, SW2172, and SW2184 Loader Mount Rotary Brooms includes required quantity of wafers to replace entire brush.

Brush diameter is 83 cm (32 in.) for big jobs
  • Brush large enough for tough jobsBrush large enough for tough jobs

    The 83-cm (32-in.) diameter brush is large enough for the toughest jobs.

     

    NOTE: Mount optional gauge wheels in rear (closest to loader) parking stand tubes if front dethatching bracket is not installed.

Gauge wheel for SW21 Series Loader Mount Rotary Brooms
  • Gauge wheels with dethatching and dust suppression kit installedGauge wheels with dethatching and dust suppression kit installed

    Gauge wheel for SW21 Series Loader Mount Rotary Brooms includes two pairs 20.3-cm (8-in.) diameter by 8.9-cm (3.5-in.) wide solid wheels, mounting brackets and hardware.

     

    Mount gauge wheels in rear (closest to loader) parking stand tubes if front dethatching bracket is not installed.

     

    NOTE: By mounting wheels in front of brush with the dethatching bracket installed; better control of ground pressure can be achieved.

     

Angling degree range
  • Angle to the left or rightAngle to the left or right

    The loader-mount hydraulic rotary broom has an angling range from 0 to 23 degrees both left and right.  Setting the angle allows windrowing of material off surfaces.

     

    NOTE: Mount optional gauge wheels in rear (closest to loader) parking stand tubes if front dethatching bracket not installed.

Optional dust suppression system
    • SW21 Series dust suppression system

      SW21 Series dust suppression system

    • 227-L (60-gal.) tank

      227-L (60-gal.) tank

    The optional dust suppression system consists of a 227-L (60-gal.) tank supplying water up the nozzles that are positioned in the front of the broom.

     

    The nozzles are easily controlled by a toggle switch located by the height hitch lever.

     

    NOTE: Requires the poly and steel deflector kit. Compatible with lawn dethatching kit.

Optional gauge wheel kit for setting surface height of broom
    • For setting surface height of broom (shown with dethatching kit installed)

      For setting surface height of broom (shown with dethatching kit installed)

    • Gauge wheels shown in rear park stand mounting tubes

      Gauge wheels shown in rear park stand mounting tubes

    Optional pair of gauge wheels available for setting the height of the broom for limited surface contact.  This ensures easy operation when sweeping surfaces or dethatching lawns.

     

    Includes two pairs; 20.3-cm (8-in.) diameter by 8.9-cm (3.5-in.) wide solid wheels, mounting brackets, and hardware.

     

    Mount gauge wheels in rear (closest to loader) parking stand tubes if front dethatching bracket is not installed.

Dust deflector for SW21 Series Loader Mount Rotary Brooms
  • Steel and rubber dust deflector kit directs material downward when using the SW21 Series Loader Mount Rotary Brooms.

Dust suppression kit for SW21 Series Loader Mount Rotary Brooms
  • Dust suppression kit includes 227-L (60-gal.) water tank, electric pump, nozzles, hoses and fittings, electrical harness with switch and installation instructions, for SW21 Series Loader Mount Rotary Brooms. 

     

    NOTE: Requires the steel/rubber dust deflector kit.

SW2160
  • Dimensions
    • Machine length
      • 1 175 cm
      • 2 69 in.
    • Machine width
      • 1 183 cm
      • 2 72 in.
    • Power pack width
      • 1 97 cm
      • 2 38 in.
    • Machine height
      • 1 87 cm
      • 2 34.25 in.
    • Power pack height
      • 1 132 cm
      • 2 52 in.
  • Weight
    • Machine operating
      • 1 390 kg
      • 2 860 lb
    • Power pack operating
      • 1 243 kg
      • 2 535 lb
    • Machine shipping
      • 1 534 kg
      • 2 1177 lb
    • Power pack shipping
      • 1 243 kg
      • 2 535 lb
  • Tractor compatibility
    • PTO minimum horsepower
      • 1 18.6 kW
      • 2 25 hp
    • PTO, rpm
      • 1 540 rpm
    • Loader, current John Deere series
      • 1 300
  • Brush
    • Standard bristle materials
      • 1 Poly
    • Optional bristle material
      • 1 Combination (poly/wire)
  • Operation
    • Working width
      • 1 152.4 cm
      • 2 60 in.
    • Working width at max angle
      • 1 139.7 cm
      • 2 55 in.
    • Brush speed, rpm
      • 1 160 rpm
  • Angling
    • Angling range degrees, left, center, right
      • 1 23, 0, 23 degree (angle)
    • Shear pin protection
      • 1 Standard
    • Angling method
      • 1 Hydraulic
  • Gauge wheels
    • Standard
      • 1 Optional
    • Material
      • 1 Solid
    • Location, front, rear
      • 1 Front
    • Size, diameter
      • 1 89x203.2 mm
      • 2 3.5x8 in.
    • Adjustable height range
      • 1 Total: 190.5 mm
      • 2 7.5 in.
      • 3 Undergroud level: 63.5 mm
      • 4 2.5 in.
    • Quantity
      • 1
  • Hydraulics
    • Operating pressure
      • 1 186 bar
      • 2 2700 psi
    • Flow required at operating pressure
      • 1 61 L/min
      • 2 16 gpm
    • Power pack reservoir
      • 1 57 L
      • 2 15 gal.
    • System capacity
      • 1 64 L
      • 2 17 gal.
  • Construction
    • Hood thickness
      • 1 0.19 cm
      • 2 0.0747 in.
    • Side frame construction
      • 1 0.48 cm
      • 2 0.1875 in.
  • Miscellaneous
    • Parking stands standard with unit, quantity
      • 1 Four
    • Hydraulic protection (relief valve)
      • 1 Standard
    • Dust deflector
      • 1 Optional
    • Dust suppression system (60-gal. water tank)
      • 1 Optional
    • Brackets for de-icer optional system
      • 1 Standard
  • Shipping
    • Configuration
      • 1 Wood crate
    • Units per crate
      • 1 One
  • Set-up time
    • Labor hours (with power pack)
      • 1 0.5 hours
      • 2 with power pack: 2-2.5 hours
  • Warranty
    • Time period (machine)
      • 1 1 year
  • Additional information
    • Date collected
      • 1
SW2172
  • Dimensions
    • Machine length
      • 1 175 cm
      • 2 69 in.
    • Machine width
      • 1 213 cm
      • 2 84 in.
    • Power pack width
      • 1 97 cm
      • 2 38 in.
    • Machine height
      • 1 87 cm
      • 2 34.25 in.
    • Power pack height
      • 1 132 cm
      • 2 52 in.
  • Weight
    • Machine operating
      • 1 404 kg
      • 2 890 lb
    • Power pack operating
      • 1 243 kg
      • 2 535 lb
    • Machine shipping
      • 1 543 kg
      • 2 1197 lb
    • Power pack shipping
      • 1 243 kg
      • 2 535 lb
  • Tractor compatibility
    • PTO minimum horsepower
      • 1 18.6 kW
      • 2 25 hp
    • PTO, rpm
      • 1 540 rpm
    • Loader, current John Deere series
      • 1 300 and 400
  • Brush
    • Standard bristle materials
      • 1 Poly
    • Optional bristle material
      • 1 Combination (poly/wire)
  • Operation
    • Working width
      • 1 182.88 cm
      • 2 72 in.
    • Working width at max angle
      • 1 167.64 cm
      • 2 66 in.
    • Brush speed, rpm
      • 1 160 or 200
  • Angling
    • Angling range degrees, left, center, right
      • 1 23, 0, 23 degree (angle)
    • Shear pin protection
      • 1 Standard
    • Angling method
      • 1 Hydraulic
  • Gauge wheels
    • Standard
      • 1 Optional
    • Material
      • 1 Solid
    • Location, front, rear
      • 1 Front
    • Size, diameter
      • 1 89x229 mm
      • 2 3.5x9 in.
    • Adjustable height range
      • 1 Total: 190.5 mm
      • 2 7.5
      • 3 Underground level: 63.5 mm
      • 4 2.5 in.
    • Quantity
      • 1
  • Hydraulics
    • Operating pressure
      • 1 186 bar
      • 2 2700 psi
      • 3 or 207 bar
      • 4 3000 psi
    • Flow required at operating pressure
      • 1 61 L/min
      • 2 16 gpm
    • Power pack reservoir
      • 1 57 L
      • 2 15 gal.
    • System capacity
      • 1 64 L
      • 2 17 gal.
  • Construction
    • Hood thickness
      • 1 0.19 cm
      • 2 0.0747 in.
    • Side frame construction
      • 1 0.48 cm
      • 2 0.1875 in.
  • Miscellaneous
    • Parking stands standard with unit, quantity
      • 1 Four
    • Hydraulic protection (relief valve)
      • 1 Standard
    • Dust deflector
      • 1 Optional
    • Dust suppression system (60-gal. water tank)
      • 1 Optional
    • Brackets for de-icer optional system
      • 1 Standard
  • Shipping
    • Configuration
      • 1 Wood crate
    • Units per crate
      • 1 One
  • Set-up time
    • Labor hours (with power pack)
      • 1 0.5 hours
      • 2 with power pack: 2-2.5 hours
  • Warranty
    • Time period (machine)
      • 1 1 year
  • Additional information
    • Date collected
      • 1
SW2184