Page header image
Adjustable cutting height
  • Cutting heights of 1.5 in. to 9 in.Cutting heights of 1.5 in. to 9 in.

    Adjusting the cutting height is easy. Along with adjusting a tractor's three-point linkage, simply move the support bar to the desired cutting height.

     

    The RC20 Series Rotary Cutters go as low as 1.5 in. or as high as 9 in.

Deck deflectors offered in chain or rubber
    • Chain deflector shown

      Chain deflector shown

    • Rubber deflector shown

      Rubber deflector shown

    The front deck and deflector support are flush with the deck on the RC20 Series Rotary Cutters. This allows water and debris an unrestricted exit off the top of the deck.

     

    These deflectors are available in:

    • Rubber or chain on the front
    • Metal or chain on the rear
iMatch™ system provides quick and easy connections
  • Provides quick and easy connectionProvides quick and easy connection

    The iMatch system converts a tractor's 3-point hitch to fixed hooks and attaching points for a super-quick connection. (The iMatch hitch is sold separately.)

Reversible hitch accommodates many types of tractor hookups
  • Low hitching point accommodates various tractorsLow hitching point accommodates various tractors

    The lower hitching point on the RC20 Series Rotary Cutter accommodates a reversible front hitch for smaller or older tractors.

     

     

Easy-to-maneuver deck
  • Provides easy maneuvering in tight areasProvides easy maneuvering in tight areas

    The round-back deck design on the RC20 Series Rotary Cutter enables easy maneuvering into tight corners and around trees, fences, and other hard-to-reach areas.

Balanced blade pan reduces vibrations
  • Statically balanced to reduce vibrationStatically balanced to reduce vibration

    There is one standard blade pan for all four sizes of the RC20 Series Rotary Cutters. The blade pan is stamped instead of fabricated and is statically balanced to reduce vibration. 

     

    The blade bar is thicker for added durability.

Lower lip (Z-profile) increases durability and strength
  • Statically balanced to reduce vibrationStatically balanced to reduce vibration

    There is one standard blade pan for all four sizes of the RC20 Series Rotary Cutters. The blade pan is stamped instead of fabricated and is statically balanced to reduce vibration. 

     

    The blade bar is thicker for added durability.

Puncture-resistant rear tires
  • Puncture resistant (laminated shown)Puncture resistant (laminated shown)

    Choose a laminated or solid rubber rear tire for the RC20 Series Rotary Cutter. Both are puncture resistant.

     

    The laminated tire is longer lasting and provides more support when working in sandy or lighter soil conditions.

RC2048
  • Dimensions
    • Overall width
      • 1 129 cm
      • 2 51 in.
    • Overall length
      • 1 220 cm
      • 2 87 in.
  • Weight
    • Operating
      • 1 232 kg
      • 2 512 lb
  • Tractor compatibility
    • PTO horsepower
      • 1 13-33 kW
      • 2 18-45 hp
    • Tractor PTO
      • 1 540 rpm
    • PTO category
      • 1 ASAE 3
  • Gear case
    • Horsepower
      • 1 34 kW
      • 2 45 hp
  • Driveline
    • Type
      • 1 Shear bolt or slip clutch
  • Hitch
    • Type
      • 1 Lift-type
    • Category
      • 1 Cat. 1, adaptable to Cat. 2
    • iMatch™ compatible
      • 1 Yes
    • AutoHitch™ compatible
      • 1 Yes
  • Deck
    • Thickness
      • 1 11 gauge
      • 2 3 mm
      • 3 0.120
    • Shape
      • 1 Flat-open round back
    • Type
      • 1 Single
  • Skirt
    • Thickness
      • 1 11 gauge
      • 2 3 mm
      • 3 0.120
  • Capacity
    • Cutting width
      • 1 122 cm
      • 2 48 in.
    • Cutting height
      • 1 4-23 cm
      • 2 1.5-9 in.
    • Cutting diameter
      • 1 0-2.5 cm
      • 2 0-1 in.
    • Cutting chamber depth
      • 1 19 cm
      • 2 7.5 in.
  • Blades
    • Tip speed
      • 1 66.5) m/s
      • 2 13,090 fpm
    • Type
      • 1 Heat treated, suction
    • Thickness
      • 1 13 mm
      • 2 0.5 in.
    • Width
      • 1 76 mm
      • 2 3 in.
  • Blade holder
    • Type
      • 1 Round pan-type
    • Diameter
      • 1 567 mm
      • 2 22.3 in.
  • Wheels
    • Quantity
      • 1 1
    • Type
      • 1 Solid rubber or laminated
    • Diameter laminated
      • 1 381 mm
      • 2 15 in.
    • Width laminated
      • 1 95 mm
      • 2 3.75 in.
    • Diameter rubber
      • 1 381 mm
      • 2 15 in.
    • Width rubber
      • 1 95 mm
      • 2 3.75 in.
  • Safety
    • Markings
      • 1 Standard
    • Front deflector
      • 1 Standard
    • Rear deflector
      • 1 Standard
  • Set-up time
    • Labor hours
      • 1 1
  • Warranty
    • Time period
      • 1 1 year
    • Gearbox
      • 1 1 year
  • Additional information
    • Date collected
      • 1
RC2072
  • Dimensions
    • Overall width
      • 1 190 cm
      • 2 75 in.
    • Overall length
      • 1 283 cm
      • 2 112 in.
  • Weight
    • Operating
      • 1 315 kg
      • 2 694 lb
  • Tractor compatibility
    • PTO horsepower
      • 1 19-49 kW
      • 2 25-65 hp
    • Tractor PTO
      • 1 540
    • PTO category
      • 1 ASAE 3
  • Gear case
    • Horsepower
      • 1 48 kW
      • 2 65 hp
  • Driveline
    • Type
      • 1 Shear bolt or slip clutch
  • Hitch
    • Type
      • 1 Lift-type
    • Category
      • 1 Cat. 1, adaptable to Cat. 2
    • iMatch™ compatible
      • 1 Yes
    • AutoHitch™ compatible
      • 1 Yes
  • Deck
    • Thickness
      • 1 11 gauge
      • 2 3 mm
      • 3 0.120 in.
    • Shape
      • 1 Flat-open round back
    • Type
      • 1 Single
  • Skirt
    • Thickness
      • 1 11 gauge
      • 2 3 mm
      • 3 0.120 in.
  • Capacity
    • Cutting width
      • 1 183 cm
      • 2 72 in.
    • Cutting height
      • 1 4-23 cm
      • 2 1.5-9 in.
    • Cutting diameter
      • 1 0-2.5 cm
      • 2 0-1 in.
    • Cutting chamber depth
      • 1 19 cm
      • 2 7.5 in.
  • Blades
    • Tip speed
      • 1 76 m/s
      • 2 14,955 fpm
    • Type
      • 1 Heat treated, suction
    • Thickness
      • 1 13 mm
      • 2 0.5 in.
    • Width
      • 1 76 mm
      • 2 3 in.
  • Blade holder
    • Type
      • 1 Round pan-type
    • Diameter
      • 1 724 mm
      • 2 28.5 in.
  • Wheels
    • Quantity
      • 1 1
    • Type
      • 1 Solid rubber or laminated
    • Diameter laminated
      • 1 381 mm
      • 2 15 in.
    • Width laminated
      • 1 95 mm
      • 2 3.75 in.
    • Diameter rubber
      • 1 381 mm
      • 2 15 in.
    • Width rubber
      • 1 95 mm
      • 2 3.75 in.
  • Safety
    • Markings
      • 1 Standard
    • Front deflector
      • 1 Standard
    • Rear deflector
      • 1 Standard
  • Set-up time
    • Labor hours
      • 1 1
  • Warranty
    • Time period
      • 1 1 year
    • Gearbox
      • 1 1 year
  • Additional information
    • Date collected
      • 1
RC2060
RC2084